Point cloud · As-built BIM · LOD 300–500

Laser Scan to BIM Services

3D laser scanning and point cloud to BIM modeling

Capstone transforms reality into BIM. We convert point cloud data captured by 3D laser scanning into accurate, intelligent as-built BIM models of existing buildings and infrastructure — in Revit and other industry-standard BIM software.

Quick answer

What is Laser Scan to BIM?

Laser Scan to BIM (Scan to BIM) is the process of capturing an existing building with a 3D laser scanner and converting the resulting point cloud into an intelligent BIM model. The as-built model shows walls, slabs, roofs, facades, structure, pipes and services as they really are, so teams can plan renovations, retrofits and facility management with confidence.

Reviewed by the Capstone BIM team · Updated October 2026

Key takeaways

  • Scan to BIM converts laser-scan point clouds into an as-built BIM model of what actually exists on site.
  • Capstone models architectural, structural, MEP and fire protection elements from point cloud data.
  • Models are delivered at LOD 300 to 500, in Revit and open formats such as IFC.
  • Accurate existing-condition models reduce manual measurement, errors and rework in renovation and retrofit projects.
  • LOD300–500
  • InputE57 · RCP · LAS
  • OutputRVT · IFC · DWG
  • DisciplinesArch · Str · MEP · FP

Quick look

Laser scan to BIM at a glance

  • 01

    Transparency & Collaboration

    Laser scanning to BIM improves transparency, communication and collaboration.

  • 02

    Performance & Quality

    The 3D model improves performance, quality assurance and reliability.

  • 03

    Lower Budgets

    Accurate existing data greatly helps reduce project budgets.

  • 04

    Faster Decisions

    Changes are easy to make, so decision-makers can decide quickly.

  • 05

    Sustainable Structures

    Reliable existing-condition data supports sustainable design.

  • 06

    Fewer Errors Early

    Errors are avoided early in the life cycle, reducing rework costs.

Workflow

From point cloud to as-built information model

We meticulously convert point cloud data into a complete As-Built Information Model that precisely represents the existing building's pipes, walls, slabs, roofs, facades, landscape and other elements.

  1. 01

    Scan

    Site captured with 3D laser scanners; data collected as point clouds.

  2. 02

    Register

    Scans aligned, cleaned and referenced to project coordinates.

  3. 03

    Model

    Point cloud converted into an As-Built Information Model (ABIM).

  4. 04

    Verify

    Model checked against the point cloud for fit and completeness.

  5. 05

    Deliver

    RVT, IFC, NWD or DWG files plus drawings and schedules.

What we model

Disciplines we model from point clouds

Detailed models for every system in the building — or one integrated model for a holistic view.

Architectural scan to BIM

Walls, doors, windows, floors, ceilings, stairs, roofs, facades and interior finishes.

PipesWallsSlabsRoofsFacadesLandscapeDuctsColumns & beamsEquipmentTopography

LOD flexibility

Scan to BIM at LOD 300 to 500

We match model detail to your project requirements — from coordination models to fully verified as-builts.

  • LOD300

    Defined geometry

    Accurate size, shape and location of key elements for design and coordination.

  • LOD350

    Coordination

    Adds interfaces, supports and connections between systems.

  • LOD400

    Fabrication-ready

    Detailed geometry for fabrication, installation or demolition planning.

  • LOD500

    As-built verified

    Field-verified representation of existing conditions for operations and FM.

Already have scan data? Or need a site scanned?

Share your point cloud or project location — we'll confirm scope, LOD and turnaround.

Benefits

Benefits of laser scanning to BIM

Why owners, architects and contractors start renovation and retrofit projects with a scan.

  1. 01

    Enhanced Transparency & Collaboration

    A shared 3D representation of the existing facility gives every stakeholder the same picture.

  2. 02

    Improved Performance & Quality

    Accurate existing data supports better design decisions, quality assurance and project reliability.

  3. 03

    Cost-Effectiveness

    Less manual measurement and fewer errors during renovation or retrofit projects.

  4. 04

    Enhanced Design Flexibility

    A digital model is easy to modify, so teams can explore options and decide quickly.

  5. 05

    Sustainable Design Considerations

    Accurate existing-condition data supports reuse, retrofit and sustainable design decisions.

  6. 06

    Reduced Errors & Rework

    Issues are found in the model early, before they become costly site problems.

Use cases

Where scan to BIM delivers value

  • Renovation & Remodeling

    Design new work around accurate existing conditions.

  • Retrofit & MEP Upgrades

    Plan new services through crowded existing ceilings and shafts.

  • Facility Management

    Hand owners a data-rich as-built model for operations.

  • Heritage & Restoration

    Document historic buildings and complex facades precisely.

  • As-Built Verification

    Compare what was built against the design model.

  • Industrial & Plant

    Model piping, steel and equipment in existing facilities.

Point cloud inputs

Formats we work with

  • E57
  • RCP / RCS
  • LAS / LAZ
  • PTS / PTX
  • XYZ
  • FLS

Registered point clouds from Leica, FARO, Trimble, NavVis and other scanners.

BIM deliverables

  • Revit (RVT)
  • IFC
  • Navisworks (NWD)
  • AutoCAD (DWG)
  • 2D drawings (PDF)
  • Schedules & quantities

Why Capstone

Unlock the potential of laser scanning with Capstone

  • Experienced Professionals

    Laser scanning and BIM specialists who deliver high-quality, precise models.

  • Advanced Technology

    Modern laser scanning equipment and BIM software for efficient capture and modeling.

  • Streamlined Workflows

    Point cloud to BIM models that integrate with your existing workflows and standards.

FAQ

FAQs on laser scan to BIM

Have scan data or a site to capture? Talk to our team.

01

What is Laser Scan to BIM?

Laser Scan to BIM is the process of converting point cloud data from a 3D laser scan of an existing building into an intelligent BIM model that represents its real, as-built conditions.

02

What is a point cloud?

A point cloud is a dataset of millions of measured 3D points captured by a laser scanner. Each point records a position on a surface, and together they form an accurate digital record of the space.

03

What is an As-Built Information Model (ABIM)?

An ABIM is a BIM model of a building as it actually exists, created from site data such as laser scans. It includes geometry and data for walls, slabs, roofs, facades, structure and services.

04

Which LOD do you deliver for scan to BIM?

We deliver LOD 300 to LOD 500 depending on project needs — from coordination-level models to field-verified as-built models.

05

Which disciplines can you model from point clouds?

Architectural, structural, MEP, fire protection and integrated multi-discipline models.

06

What point cloud formats do you accept?

Common formats include E57, RCP/RCS, LAS/LAZ, PTS/PTX, XYZ and FLS from major scanner brands.

07

What software do you use for scan to BIM?

We model primarily in Autodesk Revit, with ReCap for point cloud processing and Navisworks for review, and deliver IFC, NWD and DWG where required.

08

How accurate is a scan to BIM model?

Accuracy depends on scanner type, scan density, registration quality and the agreed modeling tolerance. We confirm the tolerance with you before modeling begins.

09

Is laser scan to BIM cost-effective?

Yes. It reduces manual site measurement, avoids design errors based on outdated drawings and cuts rework during renovation and retrofit projects.

10

Do you provide on-site laser scanning?

Site scanning can be arranged depending on project location; we also model from point clouds you supply. Contact us to discuss your project.

Laser scan to BIM

Transform your existing building into BIM

Contact Capstone today to discuss how laser scanning to BIM can transform your next renovation, retrofit or facility project.