Sprinklers · Hydrants · Foam · Water spray
Fire Protection BIM Services
Your trusted partner for BIM-powered fire protection systems
Capstone uses Building Information Modeling to deliver fire protection design and documentation services. Our fire safety team combines in-depth knowledge with BIM technology to create coordinated fire protection systems that meet project safety standards.
- Water storage capacity & pump sizing calculations
- Detailed fire protection design support
- Sprinkler, hydrant, water spray & foam layouts

Systems we model
Fire protection systems we model
Every major water-based and special suppression system — modeled from your design drawings, specifications and hazard classification.
- 01
Automatic Sprinkler Systems
Sprinkler heads, mains, branch lines, valves, gauges and hangers modeled with pipe sizes and hazard data.
- 02
Fire Hydrant Systems
Internal and external hydrant networks, landing valves and associated piping.
- 03
Hose Reels
Hose reel locations, supply piping and coverage coordination.
- 04
Water Spray Systems
Deluge and water spray piping, nozzles and valve arrangements.
- 05
Foam Systems
Foam concentrate storage, proportioning and distribution piping layouts.
- 06
Fire Pumps and Pump Rooms
Pump, jockey pump, tank connections and pump room equipment layouts.
- 07
Standpipes and Risers
Vertical risers, floor control valves and standpipe connections.
- 08
Clean Agent / Gas Suppression
FM-200 and other clean agent cylinders, piping and nozzles where specified.
Why Capstone
Why choose Capstone for BIM fire protection services?
Six reasons project teams trust us with life safety systems — select one to explore.
Enhanced Building Safety
We start by understanding your project's unique fire safety needs and translate them into effective fire protection designs. Our BIM models integrate life safety systems within your overall building model.
Includes
- Project-specific fire safety review
- Life safety systems in the federated model
- Hazard classification captured in the model
Comprehensive Fire Protection Services
A full spectrum of fire protection BIM support, from planning to installation-ready documentation.
Includes
- Firefighting plans
- 3D fire protection system modeling
- Detailed shop drawings
Clash Detection & Coordination
Our models identify layout inconsistencies, constructability issues and conflicts between fire protection systems and other building elements before site work — reducing costly rework.
Includes
- Coordination with structure, HVAC, plumbing and electrical
- Clash reports and resolution tracking
- Code-related layout issues flagged for review
Data-Rich Sprinkler Modeling
Our models carry critical fire sprinkler data to support efficient, accurate installation.
Includes
- Sprinkler heads, valves and pressure gauges
- Calculation plates and hangers
- Mains and branch lines
Riser Diagrams & Design Validation
We use BIM to generate model-based riser diagrams and review designs against applicable international fire safety codes and standards.
Includes
- Model-generated riser diagrams
- Review against NFPA and local codes
- Design queries raised for the engineer of record
Software Expertise
Our team works across major fire protection design and BIM tools, fitting into your existing workflows.
Includes
- Autodesk Revit & AutoCAD
- Navisworks coordination
- Autodesk Fabrication & IFC exchange
Our services
Our fire protection BIM services
Nine services from modeling to installation-ready documentation. Hover or tap a card for details.
- 01
3D Fire Protection Modeling
↻3D Fire Protection Modeling
Coordinated 3D models of sprinkler, hydrant, standpipe and suppression systems at the agreed LOD (100–500).
- 02
2D to 3D Conversion
↻2D to 3D Conversion
Conversion of 2D fire protection design drawings into coordinated, data-rich 3D BIM models.
- 03
Firefighting Plans and Layouts
↻Firefighting Plans and Layouts
Sprinkler, hydrant, water spray and foam system layouts from approved design intent.
- 04
Fire Sprinkler Shop Drawings
↻Fire Sprinkler Shop Drawings
Plans, sections, schedules and details for installation — issued for review and approval.
- 05
Clash Detection and MEPF Coordination
↻Clash Detection and MEPF Coordination
Fire protection models coordinated with structure, HVAC, plumbing and electrical systems.
- 06
Riser Diagrams and Schematics
↻Riser Diagrams and Schematics
Model-based riser diagrams, hydraulic zoning diagrams and system schematics.
- 07
Pump Room and Equipment Layouts
↻Pump Room and Equipment Layouts
Fire pump, jockey pump, tank and valve-room layouts with equipment tags.
- 08
Sleeve and Penetration Drawings
↻Sleeve and Penetration Drawings
Slab and wall penetration drawings with sleeve size, location and elevation.
- 09
Quantity Take-Offs and BOM
↻Quantity Take-Offs and BOM
Model-based bills of materials for pipes, fittings, heads, valves and hangers.
Engineering support
Additional fire protection engineering services
Engineering inputs that sit alongside our BIM modeling — final design approval remains with the engineer of record.
- 01
Water Storage & Pump Sizing
Calculations for fire water storage capacity and fire pump sizing, based on the approved design basis.
- 02
Detailed Design Support
Fire protection design support to help engineering teams develop and document systems.
- 03
System Design Layouts
Fire sprinkler, hydrant, water spray and foam system design layouts.
Codes & software
Codes, standards and software
Models and drawings are prepared to the codes named in your project documents, and reviewed by the responsible fire protection engineer.
- NFPA 13Sprinkler systems✓
- NFPA 14Standpipe & hose systems✓
- NFPA 20Fire pumps✓
- FM GlobalData sheets where specified✓
- Local Civil DefenseAuthority requirements✓
- Project SpecsClient standards & BEP✓
Software we use:
- Revit
- AutoCAD
- Navisworks
- Autodesk Fabrication
- IFC
Sprinkler mains clashing with ducts and beams?
Share your fire protection drawings and MEP models — we'll define the coordination scope.
Process
Our fire protection BIM workflow
- 01
STEP 01
Review Inputs
Fire protection drawings, hazard classification, specifications, architectural, structural and MEP models.
- 02
STEP 02
Confirm Scope & LOD
Agree systems, model detail, codes, software, drawing templates and deliverables.
- 03
STEP 03
Model the System
Build sprinkler, hydrant, riser, pump and suppression components from approved design data.
- 04
STEP 04
Coordinate & Resolve
Run clash detection with other trades, document issues and raise RFIs.
- 05
STEP 05
Produce Documentation
Shop drawings, riser diagrams, penetration drawings and quantity take-offs.
- 06
STEP 06
QA & Handover
Check deliverables against requirements and issue in agreed formats.
Benefits
Benefits of Capstone's BIM fire protection services
What a coordinated fire protection model gives your project team.
Improved Fire Safety & Code Alignment
Systems modeled to project codes and reviewed before installation.
Enhanced Design Efficiency & Accuracy
Data-rich models keep layouts, sizes and components consistent.
Reduced Errors & Rework Costs
Clashes and inconsistencies caught in the model, not on site.
Streamlined Construction & Installation
Clear shop drawings and riser diagrams for site teams.
Clear Communication & Collaboration
One shared model for engineers, contractors and authorities.
Optimized Performance & Maintainability
Organized model data for testing, inspection and maintenance.
Who benefits
Who benefits from fire protection BIM services?
Teams that design, coordinate, install or approve fire protection systems.
Industries we support
- Commercial towers
- Hospitals & healthcare
- Hotels & hospitality
- Residential high-rise
- Airports & metro
- Data centers
- Warehouses & logistics
- Industrial & oil and gas
- 01
Fire Protection Contractors
Sprinkler shop drawings, coordination and quantities for installation.
→ - 02
MEP Contractors
Fire protection coordinated with HVAC, plumbing and electrical.
→ - 03
Fire Safety Consultants
Extra modeling and documentation capacity for design packages.
→ - 04
General Contractors
Trade interfaces reviewed and coordination issues tracked.
→ - 05
Developers and Owners
Life safety systems documented for approval and handover.
→ - 06
Fabricators
Spool and prefabrication information for off-site work.
→
FAQ
Frequently asked questions about fire protection BIM
What are fire protection BIM services?
+
Fire protection BIM services create coordinated 3D models and documentation of sprinkler, hydrant, standpipe, pump and suppression systems to support design review, clash detection, shop drawings and installation.
Which fire protection systems can you model?
+
Automatic sprinklers, fire hydrants, hose reels, water spray, foam systems, fire pumps and pump rooms, standpipes and risers, and clean agent systems where specified.
Do you provide fire sprinkler shop drawings?
+
Yes. Shop drawings include sprinkler layouts, plans, sections, schedules and details, prepared to project standards and issued for review and approval.
Can BIM detect clashes between sprinkler pipes and other services?
+
Yes. Fire protection models are coordinated with structure, HVAC, plumbing and electrical models to identify conflicts before installation.
Which codes do your fire protection models follow?
+
Models and drawings are prepared to the codes named in the project — commonly NFPA 13, 14 and 20, FM Global data sheets and local civil defense requirements. Final compliance is confirmed by the responsible engineer and authority.
Do you provide hydraulic and pump sizing calculations?
+
Yes, water storage capacity and fire pump sizing calculations can be included in scope, based on the approved design basis and reviewed by the engineer of record.
Can you convert 2D fire protection drawings into 3D BIM?
+
Yes. We convert 2D CAD or PDF fire protection drawings into coordinated 3D models at the agreed LOD.
What information do you need to start?
+
Typical inputs include fire protection design drawings, hazard classification, specifications, architectural, structural and MEP models, BIM standards and the required deliverables.
All services
Explore all Capstone BIM services
Architectural, structural, MEP and specialty BIM services that complement fire protection coordination.
- BIMBIM Services→
- BIMArchitectural BIM Services→
- BIMStructural BIM Services→
- BIMCIP and Precast→
- BIMRebar / Reinforcement Contractors→
- BIMFraming and Drywall Contractors→
- MEP BIMMEP BIM Services→
- MEP BIMHVAC→
- MEP BIMPlumbing→
- MEP BIMElectrical→
- BIMBIM Audit Services→
- BIMRevit Content Creation→
- BIMLaser Scan to BIM→
- ResourcesBIM Projects→
- ResourcesBIM Case Studies→
- ResourcesBIM Brochures→
Sprinklers · Hydrants · Foam · Water spray
Safeguard your next project with coordinated fire protection BIM
Contact Capstone today to discuss fire protection modeling, sprinkler shop drawings, clash coordination, riser diagrams and pump sizing support for your project.